Netis P106GC 4GE POE+1GE +1GE SFP Uplink POE Switch

Hardware

 Interface

 4*10/100/1000M POE ports (Data /Power)

 1*10/100/1000M uplink RJ45 port (Data)

 1*10/100/1000M SFP port

 Basic function

 Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

 Supports POE IEEE 802. 3af/at compliant Powered Device (PD)

 Store-and-forward switching scheme

 Support IEEE802.3X full duplex and Backpressure half duplex

 MAC address auto-learning & auto-aging

 Standards

 IEEE 802.3 10BASE-T Ethernet

 IEEE 802.3i 10BASE-T Ethernet

 IEEE 802.3u 100BASE-TX Fast Ethernet

 IEEE 802.3ab 1000BASE-T Gigabit Ethernet

 IEEE 802.3af/at, Power over Ethernet

 IEEE 802.3x Flow Control

 Mode

 Normal switch mode

 Data Transfer Rate

 Ethernet : 10Mbps(Half-duplex);20Mbps(Full-duplex)

Fast Ethernet :100Mbps(Half-duplex);200Mbps(Full-duplex)

 Gigabit Ethernet :2000Mbps(Full-duplex)

 QoS

 Yes

 VLAN

 Yes

 Switching Capacity

 12G

 MAC Address Table Size

 2K

 Jumbo Frame

 2048 byte

 Environment

 Operation Temperature：0℃～40℃
 Storage Temperature：-40℃～70℃
 Operation Humidity：10%～90% RH Non-condensing
 Storage Humidity：5%～90% RH Non-condensing

 Power Input POE Standards

 Single port maximum power 30W, whole switch maximum power 60W
 Supporting over-current, over-voltage and short-circuit protection
 Supporting Soft Start of High Power PD
 Support sequential boot-up
 Power Supply Pin:12+/36-
 100-240V  1.5A Max(Input)

 52V 1.15A Max(Output)

 Cabling type

 1000Base-TX: Cat 5e or better UTP/STP(≤100m)

 100Base-TX: Cat 5e or better UTP/STP(≤100m)

 10Base-TX: Cat 5e or better UTP/STP(≤100m)

 Dimensions
(L x W x H )

 124mm*115mm*33mm